File information: | |
File name: | Sanyo_DP32642_P32642-04_Z6TJ_[SM].pdf [preview Sanyo DP32642 P32642-04 Z6TJ [SM]] |
Size: | 4799 kB |
Extension: | |
Mfg: | Sanyo |
Model: | Sanyo DP32642 P32642-04 Z6TJ [SM] 🔎 |
Original: | Sanyo DP32642 P32642-04 Z6TJ [SM] 🔎 |
Descr: | Sanyo Monitor Sanyo_DP32642_P32642-04_Z6TJ_[SM].pdf |
Group: | Electronics > Computer equipment > Monitors |
Uploaded: | 27-01-2020 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Sanyo_DP32642_P32642-04_Z6TJ_[SM].pdf SANYO TROUBLESHOOTING GUIDE 2012 MODELS DP32642-03 DP32642-04 DP39842-02 DP39842-03 This guide is divided into 4 sections/pages depending on type of defect: page 1)No Green LED Power Light.(LED never turns"ON") page 2)Green LED Light is "ON", but Backlights are not "ON",or only turn"ON & then OFF". page 3)Green LED Light is "ON",and Backlights are "ON",but there is no video/OSD. page 4)Green LED Light turns "ON", but turns "OFF"within 10 seconds. Please select the section/page that matches your defect and follow the flow chart. These models & chassis versions are in this guide: DP32642-03 DP32642-04 DP39842-02 DP39842-03 PLEASE KEEP THIS GUIDE. IT WILL NOT BE PROVIDED FOR EVERY REPAIR. [email protected] Repair Flow Chart:Trouble Condition Green Power LED does not turn on. The TV is dead. Green Power LED: Does not turn ON. The TV is dead. On analog signal board: No:0v Is the "5VSTB" voltage supplied? (see TABLE*1.0) Unplug(K702) connector on No:0v power board. On Power board: Power board is not working. Yes:5v Is the "5VSTB" voltage supplied? Replace "Power board". (see TABLE*2.0) Yes:5v No:0v Unplug(K16A) and(K16B) connector Analog board is not working. between digital unit and analog unit Replace "analog board". Is the "5V_STBY" voltage supplied? (see TABLE*3.0) Yes:5v Replace "digital board". On digital signal board: No:0v Is the "5V_STBY" voltage on "K5A55 Pin 3 or Pin 4"? (see TABLE*4 |
Date | User | Rating | Comment |